Vestil S-FORK-4-AT Manuel d'utilisateur télécharger pdf (Page 2)

S-Fok-4-AT manual 07/19/11

Product Introduction

Thank you for purchasing an S-Fork-4-AT model fork attachment. Our S-Forks are durable, high-quality products that

integrate safety-enhancing features. Although use is relatively intuitive, all persons who might use, maintain or repair this

device should familiarize themselves with the instructions provided in this manual. Product specifications appear in the

following table:

Model Hook type

Usable fork pocket dimensions

(W x H) in inches (~cm)

Uniform capacity

in pounds (~kg)

Net weight in

pounds (~kg)

S-FORK-4-AT

Auto-tensioning

swivel hook

5½ x 1

(14 x 4.8)cm

4,000

(1,818 kg)

(7.3 kg)

Safety Principles

This manual classifies personal injury risks and situations that could lead to property damage with signal words.

These signal words announce an associated safety message. The reader must understand that the signal word chosen

indicates the seriousness of the hazard described in the message.

Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS

INJURY. Use of this signal word is limited to the most extreme situations.

Page 2 of 7

Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS

INJURY.

Indicates a hazardous situation which, if not avoided, COULD result in MINOR or MODERATE

injury

Identifies practices likely to result in product/property damage, such as operation that might damage the

fork attachment (hoist hook).

Safety Guidelines:

Failure to read and understand the instructions included in this manual before using or servicing this fork attachment

constitutes misuse of the product. Product misuse automatically voids the “Limited warranty”

(see p. 7).

Study the entire manual before you use the product for the fi

rst time and before each subsequent use as necessary to

refresh your understanding of the use, inspection and maintenance procedures explained on p. 4 & 5. Each person, who

will or might use or maintain the attachment, should read the entire manual and fully understand the directions BEFORE

using or performing maintenance on the device. If you do not understand an instruction, ask your employer/supervisor for

clarification, because failure to apply the directions in this manual might lead to serious personal injury or even death

Vestil is not liable for any injury or property damage that occurs as a consequence of failing to apply either: 1) the

instructions that appear in this manual; or 2) the information disclosed on labels affixed to the product. Furthermore,

failure to exercise good judgment and common sense while using or maintaining the product could result in property

damage, serious personal injury or death.

Electrocution hazard: DO NOT contact electrified wires with any part of the fork attachment (S-Fork), the

fork lift, or the attached load. Always inspect the area where the device will be used prior to use.

Improper use might result in serious personal injuries. Therefore, EVERY PERSON who might use,

perform maintenance on, or service the fork attachment must understand and apply all of the following recommendations:

 DO NOT attempt to resolve any problem with the fork attachment unless: 1) you are authorized to do so; AND 2) you

are certain that it will be safe to use afterwards.

 Inspect the attachment before each use if necessary to recall “Use instructions” (p. 4).

 DO NOT use the device unless it is in satisfactory condition! If you observe any significant damage to, for instance, the

fork tube weldment, tension arm, hook or shackle (see FIG. 1 on p. 3), immediately tag the unit “Out of Service” and

inform authorized maintenance personnel about your observations. DO NOT use the attachment until it is restored to

normal condition.

 This device is designed for material handling only. DO NOT use the attachment in conjunction with personnel-conveying

equipment, such as work platforms.

 DO NOT leave an elevated load unattended. Lower the forks until the load is fully supported by the ground, and

disengage the load from the hoist hook before leaving it unattended.

 DO NOT alter the device from its original configuration. Unauthorized modifications might make the fork attachment

unsafe to use. If injuries and/or property damage occurs AFTER modifying (altering from original form) the

product without authorization from Vestil, fault belongs exclusively to the person who modified the product.

 DO NOT use the fork attachment to lift and move a load that cannot be adequately stabilized when lifted with the S-

Fork. ALWAYS apply the relevant lifting practices implemented at your worksite.

 DO NOT sit on or apply any weight/pressure to a suspended load.

Cop

yright 2011 Vestil Manufacturing Corp.

1 2 3 4 5 6 7

Commentaires sur ces manuels

Pas de commentaire

Vestil S-FORK-4-AT Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Vestil S-FORK-4-AT